0,00 TL
Areas of Use: WEINIG or Multi-Spindle Milling Machines
Features: By removing and installing the washers between the sets, the wick opening process can be adjusted between 36 mm and 42 mm and is solved by attaching a saw to the right 2nd engine.
Features: By removing and installing the washers between the sets, the wick opening process can be adjusted between 36 mm and 42 mm and is solved by attaching a saw to the right 2nd engine.
Note: The right blade is attached to the 1st shaft on the right side, if the auxiliary blade is used in production, it is attached to the 2nd right shaft.
| 6000-800 SOL | D | h | R | Z | d |
| A | 128.9 | - | 3 | 4 | 40 |
| B | 118 | 35 | - | 4 | 40 |
| C | 180 | 4.7 | - | 12 | 40 |
| D | 120 | 10 | - | 4 | 40 |
| 6000-800 RIGHT | D | h | R | Z | d |
| A | 126.7 | - | 3 | 4 | 40 |
| B | 116 | 35 | - | 4 | 40 |
| C | 180 | 4.7 | - | 12 | 40 |
| D | 120 | 10 | - | 4 | 40 |
Areas of Use: WEINIG or Multi-Spindle Milling Machines
Application: It is possible to open a lamp hole of the desired width by attaching it to the lower shaft. If the auxiliary knife is not used during production, it is attached to the first lower shaft; if it is used, it is attached to the last lower shaft.
Features: It can be used quickly and for long periods of time thanks to the successive slide tips.
| 6000-803 BOTTOM LAMP | D | h | R | Z | D |
| 130 | 50 | 3 | 3+3(18) | 40 |
Areas of Use: WEINIG or Multi-Spindle Milling Machines
Application: It is used to lighten the load of the lower lamp assembly in the production of serial door frames and at the same time opens the wick space. It is installed on the 1st right during the production phase.
Features: It reduces the load on the tools as it allows fast processing thanks to the Diameter inserts.
| 6000-804 AUXILIARY TEAM | D | h | z | d |
| 152 | 15 | 4 | 40 |
| DIAMOND ROVING SAW | D | h | z | d |
| 200 | 3 | 20 | 40 |
Areas of Use: WEINIG or Multi-Spindle Milling Machines
Application: Door frame processing
Features: It is specially manufactured for 42 mm or 36 mm cases.
| 6000-805 DIA-END OVAL CASE | D | h | R | z | d |
| B | 190 | 34 | 30 | 4 | 40 |
| C | 160 | 4.7 | - | 12 | 40 |
| D | 100 | 10 | - | 4 | 40 |
Be the first to comment on this product!